Solar Powered Wireless Beam Detector:

Please Note this receiver requires a wired internet connection (standard RJ45 ethernet connection) and an iPhone for full app functionality. 

Detector Size: 340 (H) X 123 (W) X 45 (D) mm
Power Supply: Re-Chargeable Batteries (Making For Easy Wireless Installation)
Charging Method: Built In Solar Panels (DC input on back for optional charging options such as extra solar panels)
Multi Detecting Beams: (Prevents False Alarms From Small Animals And Moving Debris)
Detection Range: 100 Yards Between Detectors (Line Of Sight)
Wireless Range To Receiver: Impressive 800 Yards (Line Of Sight)
Quality construction
Mounting Methods: Supplied With Wall & Pole Mounting Brackets
Test Light: (For Easy Installation, Actual Detector Beams Are Invisible To The Naked Eye)
Frequency: 433 MHz
IP Rating: Ip66
Distance Between Detection Beams: 60mm

Advanced Wireless Control Panel:

Main Features:
Connects via standard JR45 Ethernet connection to your homes internet  (can connect to your modem directly or to your internet router)
Top Quality Full Metal Construction
Lockable front door with tamper sensor
Wireless Alerts to your phone
Control the receiver via the iPhone App
Battery backup (optional) for power outage or if thief cuts power the alarm will still sound and function as normal.
Light Up LCD Display
Manual Set a schedule for arming and disarming of the alarm.

Specification:
Receiver Size: 165 (W) X 175 (H) X 62 (D) mm
Power: 15v DC and optional 12V battery backup
TCP/IP RJ45 Standard Ethernet Connection
Built in Speaker
Frequency: 433 MHz FSK
Wireless Working Range: 800 Yards (Line Of Sight, Depending On Which Detectors Are Being Used)

Easy to install:

The lack of power wiring needed for the Perimeter detectors means you can place them in obscure out of the way places where power maybe difficult to get to. The perimeter beams need to be mounted facing each other, they are very easy to install as they have a built in red glow light (for easy shorter length lining up) which illuminates for a while after switching the beams on, after a while this light will automatically switch off adding to your security.
The dual detection technology is made up of multiple detecting beams (60 mm apart), which need to be activated at the same time, before the alarm signal is sent back to the receiver. This reduces false alarms from small animals, leaves, debris, rain etc.
You can easily add additional beams, sirens & indoor/outdoor receivers to this system at any time.

Easy Programming:

Turn on beams (Switch’s On Rear).
Mount the beams.
Line up by eye or string line / laser pen Etc for longer distances
Load the App, Put App in learning mode
Walk through the beams, at this time (providing you have them correctly lined up) a bright red glow will illuminate.
The signal sent to the receiver from this set of beams will be programmed into the relevant receiver.
The system is now ready.

What You Receive With This System

1 X Advanced TCP/IP Indoor Receiver
1 X Wall Power Supply for Receiver
2 X Wireless Hand Held Remote
1 X Alarm Antenna for Receiver
2 X Key for front panel
1 X Battery Backup Connection Wire
1 X Receiver Manual
1 X Solar Powered Detecting Beam Set (additional sets can be added at any time)
1 X Set Of Wall Mounting Brackets (included for each sensor set)
1 X Set Of Pole Mounting Brackets (included for each sensor set)
1 X Setup Instructions