Affordable & Versatile Security System

The system works by installing the perimeter beams (additional sets can be added) in a location that you need to protect The beams can be up to 100 yards away from each other. Solar powered Mount the outdoor receiver to an external wall (no wires required) Up to 800 yards away from detection beams. When a vehicle or person passes through the beams the receiver will chime or sound alarm and flash depending on your setup.


Solar Powered Wireless Beam Detector:

Detector Size: 340 (H) X 123 (W) X 45 (D) mm
Power Supply: Re-Chargeable Batteries (Making For Easy Wireless Installation)
Charging Method: Built In Solar Panels (DC input on back for optional charging options such as extra solar panels)
Multi Detecting Beams: (Prevents False Alarms From Small Animals And Moving Debris)
Detection Range: 100 Yards Between Detectors (Line Of Sight)
Wireless Range To Receiver: Impressive 800 Yards (Line Of Sight)
Quality construction
Mounting Methods: Supplied With Wall & Pole Mounting Brackets
Test Light: (For Easy Installation, Actual Detector Beams Are Invisible To The Naked Eye)
Frequency: 433 MHz
IP Rating: Ip66
Distance Between Detection Beams: 60mm


Wireless Multifunction Receiver:

Select between alarm or chime
Can use remote controller to arm, disarm, emergency alarm and cancel alarm.
Should be installed in location that receives direct sunlight
Receiver Size: 280 (W) X 160 (H) X 74 (D) mm
Working voltage: 6V
Battery type: LiFePO4 battery
Battery capacity: 3000mAH
Static working rate current: 2mA
Working environment temperature:-30℃~70℃
Alarm Volume: 90dB
High light LED luminous flux: 70 lm each
Max Sets Of Beams Per Channel: 32
Frequency: 433 MHz
Wireless Working Range: 800 Yards (Line Of Sight, Depending On Which Detectors Are Being Used)


Easy to install:

The lack of power wiring needed for the Perimeter detectors means you can place them in obscure out of the way places where power maybe difficult to get to. The perimeter beams need to be mounted facing each other, they are very easy to install as they have a built in red glow light (for easy shorter length lining up) which illuminates for a while after switching the beams on, after a while this light will automatically switch off adding to your security.
The dual detection technology is made up of multiple detecting beams (60 mm apart), which need to be activated at the same time, before the alarm signal is sent back to the receiver. This reduces false alarms from small animals, leaves, debris, rain etc.
You can add additional beams, sirens & indoor receivers to this system.

 
Easy Programming:

Turn on beams (Switch’s On Rear).
Mount the beams.
Line up by eye or string line / laser pen Etc for longer distances
Put the relevant receiver into learn mode
Walk through the beams, at this time (providing you have them correctly lined up) a bright red glow will illuminate.
The signal sent to the receiver from this set of beams will be programmed into the relevant receiver.
The system is now ready.


What You Receive With This System
1 X Solar Powered outdoor Receiver Alarm
1 X Metal Rear Mounting Bracket for Receiver
1 X Bag of screws for receiver mouting bracket
1 X Wireless Hand Held Remote
1 X Receiver Manual
1 X Solar Powered Detecting Beam Set (add upto 4 sets total)
1 X Set Of Wall Mounting Brackets (included for each sensor set)
1 X Set Of Pole Mounting Brackets (included for each sensor set)
1 X Setup Instructions